Plumbing and HVAC Service In New Albany, IN

Conducted fall maintenance on Carrier Infinity 98 gas furnace. Cleaned heat exchanger, checked for cracks. Replaced air filter with MERV 11 pleated filter. Calibrated thermostat and tested safety controls. Cleaned flame sensor and checked igniter gap. Lubricated blower motor bearings. Inspected flue for proper venting. Tested for carbon monoxide leaks using Testo 320 analyzer. Adjusted gas pressure to manufacturer specifications. System now operating at peak efficiency for heating season.

I completed a drain cleaning service for a customer experiencing slow drainage in their kitchen sink. After inspecting the drain, I used a motorized drain auger to clear the blockage, which was caused by a buildup of grease and debris. Once the line was cleared, I flushed the drain with water to ensure smooth flow. The kitchen sink is now draining properly, and no further clogs were found during the inspection. The homeowner was pleased with the quick and effective results.

I performed a complete IAQ (Indoor Air Quality) testing for a homeowner concerned about allergens and pollutants in their home. I used a particle counter and a VOC sensor to detect dust, pet dander, and volatile organic compounds in the air. After collecting and reviewing the data, I recommended installing a whole-home air purifier with HEPA filtration and a UV-C light to neutralize airborne contaminants. I also checked the humidity levels in the ductwork and suggested a humidifier for optimal comfort. The homeowner is now considering these options to improve their home’s air quality and overall health.

Responded to an urgent call for a clogged main sewer line. Used a power auger to clear the blockage, which was caused by tree roots infiltrating the line. After clearing the clog, inspected the sewer line with a camera to ensure it was fully cleared and no further obstructions were present. The emergency was handled promptly, restoring normal flow.

Diagnosed and repaired a Rheem RAPL-036JAS air conditioner in New Albany, IN. Identified failed compressor contactor using Fluke 117 multimeter. Replaced with Emerson 90-341 2-pole 40 amp contactor. Cleaned condenser coils with Nu-Calgon 4291-08 Nu-Brite, improving heat transfer efficiency. Recharged system with R-410A refrigerant using Fieldpiece SM480V digital manifold. Installed new Honeywell TH6320WF2003 Wi-Fi thermostat for improved temperature control. Conducted amperage draw test on compressor and fan motors using UEi DL389 clamp meter. Post-repair performance test confirmed proper cooling operation and system efficiency.

Evaluated repair options for a malfunctioning 50-gallon Bradford White gas water heater today. For a repair, I recommended replacing the thermocouple and pilot assembly components. As an alternative, I proposed installing a new 50-gallon A.O. Smith Signature Premier GPVX-50 power-vented gas model. This unit has a 9-year warranty and 0.67 energy factor rating for improved efficiency over the existing heater. I provided the homeowner with both the repair and full replacement quotes for their consideration.

I addressed a service call for a Carrier Infinity 19VS air conditioning unit that wasn't cooling the upstairs rooms effectively. During my inspection, I found the indoor evaporator coil was heavily clogged with dirt and debris. I cleaned the coil thoroughly using Nu-Calgon CoilShine cleaner and flush 'n rinse solution. This restored the system's airflow and cooling capacity to normal. The Carrier Infinity 19VS is now operating efficiently, delivering the expected comfort. Regular coil cleaning is essential for maintaining optimal performance.

Just completed an HVAC maintenance and thermostat repair job for a customer in New Albany, IN. I inspected and cleaned the evaporator and condenser coils, checked refrigerant levels and pressure, replaced the air filter, and cleaned the blower assembly. I also repaired a malfunctioning thermostat by replacing the faulty sensor and recalibrating it. Finally, I verified system operation, ensuring efficient heating and cooling performance. All components are functioning within manufacturer specifications.

Water heater repair completed successfully. Replaced a faulty thermocouple and cleaned the burner assembly. Flushed the tank to remove sediment buildup, ensuring optimal efficiency. Checked the gas line connections and tested the pilot light. Adjusted the thermostat to the recommended temperature of 120°F. Verified the pressure relief valve function and inspected for leaks. The water heater is now operating efficiently and safely.

Today, I repaired a leaking P-trap under a kitchen sink. The job involved removing the old, corroded P-trap and installing a new PVC P-trap kit. I ensured all connections were tight and leak-free using Teflon tape and hand-tightening techniques. The repair restored proper drainage and eliminated leaks, maintaining the sink's functionality.

I was called to a home in New Albany, IN to diagnose a persistent sewer line clog. Using a sewer camera inspection, I was able to identify the source of the blockage - a large tree root had infiltrated and obstructed the 4-inch PVC main line. I then utilized a specialized high-pressure water jetting system to break up and flush out the root intrusion. This effectively cleared the clogged sewer line, restoring proper drainage for the homeowner.

Installed a new Trane XR17 heat pump system for a homeowner in New Albany, IN. Positioned the outdoor unit and connected it to the existing ductwork. Wired the system to the thermostat and electrical panel. Conducted thorough testing to ensure proper operation and efficiency. Educated the homeowner on system maintenance and operation for optimal performance.

Just completed drain cleaning for a homeowner in New Albany, IN. Utilized high-powered equipment to clear clogs and restore proper drainage. Ensured smooth water flow and prevented potential backups. Residents can now enjoy hassle-free plumbing and peace of mind in New Albany, IN.

Installed a new gas furnace, the Trane XV95, for a homeowner in New Albany, IN. Offering reliable heating, the Trane XV95 ensures efficiency and comfort during cold seasons. With its advanced features, residents can now enjoy warmth and energy savings in their home in New Albany, IN.

Responded to a water heater producing lukewarm water. Conducted a thorough inspection and identified a faulty heating element. After performing a heating element replacement, the water is heating to the correct temperature.

Attended to a furnace making unusual noises. Inspected and identified a worn-out blower motor causing the noises Performed a blower motor replacement to restore quiet and efficient heating.

Executed a comprehensive furnace replacement due to irreparable damage. Installed a modern, environmentally friendly unit, ensuring seamless integration with existing ductwork for efficient heating across all zones.

New water heater installation for a homeowner. The current hot water system is an outdated tank style. Removed the existing unit and installed a replacement tankless water heater unit that is more energy-efficient and will cut down on wait times for hot water. Tested all connections and water pressure for proper performance.

Emergency plumbing service for a clogged sewer line that was causing water backup. Inspected the line to locate the clog and clear it. Ensured that there is no damage to the sewer line that needs to be repaired. Everything looks good after the sewer cleaning and the water is restored.

Drain cleaning for a clogged bathroom sink drain that was starting to back up water. Located the blockage and broke it up to restore the water flow. Let the sink run for a bit to ensure the drain is cleared and the clog is gone.

The customer called to see about scheduling a new smart thermostat for their existing AC system. Recommended a new mini-split system with zone controls to keep the house at an even temperature and replace the aging air conditioner. The client is very pleased.

Residential customer needed AC repair. There was a musty smell near the air conditioning unit. Upon inspection, I could see that the AC Drain Line is clogged. I was able to flush the line and get the drain functioning properly again. I cleaned up the standing water by the AC and the customer had a fully functional AC again.

Called out for a residential preventative air conditioning tune-up. Performed AC maintenance by replacing the AC air filter, checking the condenser coils, cleaning inside the unit and checking refrigerant levels. Had to clean the condenser coils but now the HVAC is running well!

As part of a total renovation, the homeowner upgraded to a new furnace & new central air conditioner. Also provided a quote for a new air scrubber to improve air quality.

New homeowners wanted to get an inspection on all plumbing, heating and cooling. The house was built 4 years ago and everything has been very well maintained so far. Did a minor tune-up on the AC unit. Suggested scheduled maintenance plan for HVAC equipment. Will be back in the fall to tune up the furnace.